For Tactical Rifle Scopes for 3-12x44mm:Max. Elevation/Windage Adjustment
Range (MOA):﹢/－35MOA.
The maximum elevation and windage adjustment range of a scope or optic is typically represented in MOA (Minutes of Angle) or MIL (Milliradians). In your case, the range is listed as ±35 MOA.
MOA is a unit of angular measurement commonly used in shooting sports. It is approximately equal to 1.047 inches at 100 yards. Therefore, ±35 MOA means that the scope can be adjusted up or down by a maximum of 35 MOA from the zero point. The same applies to windage adjustments, which control the horizontal alignment of the scope's reticle.
To clarify, Tactical Rifle Scopes for 3-12x44mm have a ±35 MOA adjustment range, you can adjust the elevation or windage by a maximum of 35 MOA in either direction. This allows you to compensate for bullet drop, windage, or make fine adjustments to your point of aim.
It's important to note that the specific adjustment range may vary depending on the scope or optic you are using. Different models and manufacturers may have different maximum adjustment ranges. It's always a good idea to consult the documentation or specifications of your specific scope to ensure you have accurate information about its adjustment capabilities.
Product Specification
|
ITEM NO |
BM-RSM072
|
|
Model Number |
3-12x44SFIR |
|
Magnification |
3-12x |
|
Scope Tube Diameter |
30mm |
|
Lens Coating |
Fully Green Multi Coated |
|
Ocular Lens Diameter |
31mm |
|
Objective Lens Diameter |
44mm |
|
Exit Pupil |
13.3mm-3.3mm |
|
Max. Elevation/Windage Adjustment Range (MOA) |
﹢/－35MOA |
|
Parallax Correction(yds) |
10yds-∞ |
Application Hunting /Shooting
IWA -BARRIDE Optics
Hot Tags: tactical rifle scopes for 3-12x44mm, China tactical rifle scopes for 3-12x44mm manufacturers, suppliers, factory
