Optical Rifle Scopes for Hunting

Part Of The Optical Rifle Scopes for Hunting :

Elevation Adjustment, Objective Lens, Flip-up Transparent Cap, Eyepiece, See-through Mount Type, CR2032 Battery House, 12 Levels of Brightness Powered By LED, Windage Adjustment, Low Profile Rail Mount.

• 2MOA round aiming dot
• Magnification: 1x
• Battery Type: One (1) CR2032
• Battery Life: Up to two years
• Shock, dust, impact, fog and recoil resistant
• Material : Aircraft Grade Anodized Aluminum
• Height: 2.09"
• Length: 2.73"
• Width: 1.54"
• Weight: 5.9oz
• Illumination Settings: 12x
• Adjustment Range:80MOA
• Adjustment Graduation: 1 MOA

It is recommended to have the red dot sight mounted by a professional gunsmith. However, if attempting to mount the sight without professional assistance, please red and strictly adhere to the following directions.

WARNING! Never attempt to mount the sight on a loaded firearm.

1. The red sot sight comes with a weaver/ picatinny mount.

2. Unloaded the weapon. Remove the bolt/ firing pin to ensure the weapon is incapable of firing.

3. Install the red dot sight onto a weaver or picatinny base. Once the alignment is checked, tighten the mounting screw. Take care not to over tighten.

4. Ensure the red dot sight proves the desired eye relief.

5. Check the alignment and position, then boresight the sight.

Hot Tags: optical rifle scopes for hunting, China optical rifle scopes for hunting manufacturers, suppliers, factory, 3 9x40mm Hunting Rifle Scopes, Rifle Scopes, Optical Rifle Scopes for Hunting, Hunting Rifle Scopes, 3 9x50mm Mil Dot Reticle Rifle Scopes, 3 9x50mm Hunting Rifle Scopes